User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Honeywell UDCÿ5000:Universal Controller
DATE:                  26-Feb-96
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       37
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F
  1.002  ASK+                                          X
  1.003  DISP         Install UUT in mainframe and apply power.
  1.004  DISP         Allow the UUT 1 hour warm-up.
  1.005  DISP         On UUT, select SETUP until INPUT 1 is displayed.
  1.006  DISP         Select FUNC key 1 times for the IN1 TYPE display.
  1.007  OPBR         Does the UUT display T TC H?
  1.008  JMPF         1.011
  1.009  CALL         Honeywell UDC 5000 Type T øF - High
  1.010  JMP          1.022
  1.011  OPBR         Does the UUT display T TC L?
  1.012  JMPF         1.015
  1.013  CALL         Honeywell UDC 5000 Type T øF - Low
  1.014  JMP          1.022
  1.015  OPBR         Does the UUT display 4 - 20mA?
  1.016  JMPF         1.019
  1.017  CALL         Honeywell UDC 5000 4 - 20mA
  1.018  JMP          1.022
  1.019  OPBR         Does the UUT display 100 PT
  1.020  JMPF         1.022
  1.021  CALL         Honeywell UDC 5000 100 PT
  1.022  HEAD         {}
  1.023  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.023  DISP         {º THIS COMPLETES THE VERIFICATION º}
  1.023  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.024  END